ProSoft Technology MVI56-103M - Manual (Page 58)

Ladder Logic MVI56-103M ♦ ControlLogix Platform
User Manual IEC 60870-5-103 Master Communication Module
Page 58 of 152 ProSoft Technology, Inc.
February 22, 2013
Channel Status Object (I103MCHStat)
The I103MCHStat object holds the status data related to a single IEC 60870-5-
103 Master port. The following table describes the structure of the object.
Data Type Description
State State machine value
CmdReq Number of command requests
CmdResp Number of command responses
CmdErr Number of command errors
Req Number of request messages
Resp Number of responses
ErrSent Number of errors sent
ErrRec Number of errors received
CfgErr Configuration Error Word for channel
CurErr Current error code for channel
LastErr Last error for channel
This information is passed to the controller from the module with each normal
read block image.
Configuration/Error Status Flags (CfgErr)
The CfgErr word member of the I103MCHStat reports configuration errors for the
respective server. If the module is not functioning as expected, inspect the value
presented in this object. If a configuration error exists, the associated bit will be
set. A value of zero for the bit indicates the configuration value is valid. This does
not guarantee that the module is configured correctly for your application. The
bits used by this member are shown in the following table.
Bit Code Description
0 0x0001 Invalid baud rate selected
1 0x0002 Invalid parity selected
2 0x0004 Received timeout set to 0
3 0x0008 Invalid Port selected for a session
4 0x0010 Invalid sector count for session
5 0x0020 Could not allocate memory for sector of a session.
6 0x0040
7 0x0080 Invalid failure delay or confirm timeout for session.
8 0x0100
9 0x0200
10 0x0400
11 0x0800
12 0x1000
13 0x2000
14 0x4000
15 0x8000