Canon PowerShot G7 X Mark II - Manual (Page 53)

53
3 Sorting
Images
1
2
4
5
Introduction
Contents
Downloading
Images
Viewing
Images
Printing
Images
Editing
Images
Reference/
Index
6 Processing
Large Numbers
of RAW Images
7 Remote
Shooting
8 Specifying
Preferences
If the shooting result is dark or the contrast is low, you can use the Auto
Lighting Optimizer function to auto-correct the brightness and contrast,
and obtain a more favorable image.
You can also change the setting of the image shot with the camera’s
Auto Lighting Optimizer function.
This function also can be used for JPEG/TIFF images in addition to
RAW images.
* ALO stands for Auto Lighting Optimizer.
1 Checkmark the [Auto Lighting Optimizer] checkbox.
 For the image shot with the camera’s Auto Lighting Optimizer
function, the checkbox is already checked.
2 Change the setting according to your preferences.
 Auto correction is applied to the image to match the setting.
 For the image shot with the camera’s Auto Lighting Optimizer function,
the setting at the time of shooting is applied as the default value.
 To cancel the Auto Lighting Optimizer, remove the check mark
from the checkbox.
Using the Auto Lighting Optimizer
Checkmark
Select from three
levels: Low/Standard/
Strong
 When [Highlight tone priority] is set to [Enable] on any supported
EOS camera other than the EOS-1D Mark IV, or EOS 5D Mark II,
the Auto Lighting Optimizer cannot be used for RAW images.
 You cannot use the Auto Lighting Optimizer with multiple-
exposure RAW images created with the camera.
 When you apply Auto Lighting Optimizer to the RAW and JPEG
images shot simultaneously, the correction results of the two
images may differ.