Ir in/ir out terminal connection, Audio out terminal connection – Panasonic TH-55VF2HW 54.6" Full HD Video Wall Display User Manual

Page 28

Advertising
background image

English

28

IR IN/IR OUT terminal connection

Connect the IR cable from the IR OUT terminal of the

first display to the IR IN terminal of the second display.
The infrared signal of the first display is sent to the

second display.
In this case, the IR (infrared ray reception on the remote

control sensor) on the second display does not operate.
Repeating the above connections enables the daisy

chain connection.
It is possible to receive signal from the remote control

by connecting the supplied external IR receiver to the IR

IN terminal.

Note

Connection cables are not supplied with this unit.

While controlling this display, if the external IR

receiver or the IR cable is connected to the IR IN

terminal, it cannot be controlled with the unit’s remote

control sensor.

External IR Receiver (supplied)
IR cable
First display
Second display
Third display

AUDIO OUT terminal connection

Note

Audio equipment and the cable shown are not

supplied with this set.

line-in

Stereo audio cable (commercially available)
Audio equipment

Note

To output sound from AUDIO OUT terminal of the

unit, be sure to set [Output select] in the [Sound]

menu to [AUDIO OUT]. (see page 43)

Advertising