Panasonic TH-55VF2HW 54.6" Full HD Video Wall Display - Manual (Page 61)

61
English
Setting conditions
The following table describes restrictions (available
combinations) on each setting item.
Main
HDMI
DIGITAL LINK
DVI-D1
DVI-D2
PC USB
Backup
HDMI
DIGITAL LINK
DVI-D1
DVI-D2
○ Ч Ч
PC Ч Ч Ч
USB Ч Ч Ч
○: Selectable for both Primary and Secondary.
×: Not selectable for neither Primary nor Secondary.
Recall display
Pressing <RECALL> displays any of the followings.
● When the main input is being used for viewing and
the operating conditions for the Backup Input function
are met.
HDMI
16:9
Main input
Backup OK
● When the backup input, enabled by the operation of
the Backup Input function, is being used for viewing.
HDMI
16:9
Backup Input
DVI
When the conditions for the Backup Input function
are met, the following screen is displayed.
Main input
Backup OK
■
[Input change mode]: [Normal]
Switches to the backup input if an interruption of
video occurs.
Note
● Upon switching to the backup input, the video and
audio adjustment values for the backup input will be
used.
● This function will start operating once a video signal is
detected by both the input in use for viewing and the
backup input and the [Backup input change] item is
displayed as [Active].
[Primary backup input]
Sets the first priority backup input.
[(None)] / [HDMI] / [DIGITAL LINK] / [DVI-D1] /
[DVI-D2] / [PC] / [USB]
The input that is of the same type as the one in use
for viewing will be greyed out.
[Secondary backup input]
Sets the second priority backup input.
[(None)] / [HDMI] / [DIGITAL LINK] / [DVI-D1] /
[DVI-D2] / [PC] / [USB]
The input that is of the same type as the one in use
for viewing will be greyed out.
[Auto switch back mode]
Sets whether or not to automatically return to the
former (main) input when the former input video
initially viewed is restored while viewing the video
of the backup input enabled by the operation of the
Backup Input function.
[Disable]:
Unreturned
[Enable]:
Returned
[Backup input change]
Displays whether or not operating conditions for the
Backup Input function are met.
[Inactive]:
Indicates that the conditions are not met, and
inactivates the Backup Input function.
[Active]:
Indicates that the conditions are met, and activates
the Backup Input function.
[Main input]
Displays the (main) input initially used for viewing.
[Current input]
Displays whether the input currently in use for viewing
is the (main) input initially used for viewing or the
backup one.
Setting conditions
The following table describes restrictions (available
combinations) on each setting item.