Panasonic TH-55VF2HW 54.6" Full HD Video Wall Display - Manual (Page 92)

English
92
Operating with Web Browser
■
Description of each section
Page tab
Click these to switch pages.
[Status]
Click this item, and the status of the Display is
displayed.
[Display control]
Click this item to display the Display control page.
[Detailed set up]
Click this item to display the advanced settings page.
[Change password]
[Crestron Connected]
Click this item to display the Crestron Connected
operation page.
[Browser Remote Control]
Click this item to display the Browser Remote
Control on the WEB browser, which is the same as
the supplied remote control.
■
Display status page
Displays the display status.
Click [Status], then [Display status] to display the Status
information page.
This page displays the Display statuses established for
the items shown below.
Displays the type of Display.
Displays the firmware version of the Display main
unit.
■
Network status page
Displays the current configuration information of the
network.
Click [Status], then [Network Status] to display the
Status information page.
Displays the current configuration information of the
network.
Displays the configuration details of wired LAN.
■
Input information page
Displays the input information of this unit.
Click [Status] → [Input status].
Displays the information of the input terminal.
Displays the information of the input signal.
Note
● If an input is other than USB input, the name of the
input signal is displayed.
● In the case of USB input, the name of the file being
played is displayed.
● [----] is displayed in standby mode.
■
Basic control page
The basic operations of the unit can be performed.
To move from another page, click [Display control], then
[Basic control].
Power On/Off control
Use these to select the input signals
AUDIO mute
Switches aspect mode