Panasonic TH-55VF2HW 54.6" Full HD Video Wall Display - Manual (Page 44)

English
44
Picture Adjustments
1 Press <PICTURE> to display the
[Picture] menu.
80
95
40
60
50
20
5
Refine enhancer
Gradation smoother High
On
Picture
Default Default
Picture mode Natural signage
2.2
6500K
Backlight
Contrast
Brightness
Colour
Hue
Sharpness
Gamma
Colour temperature
Dynamic contrast
Colour enhancement
Memory save
Memory load
Memory edit
Mid
Low Enhance level
2 Select the item to adjust with .
● Menu that cannot be adjusted is greyed out.
3
Adjust with .
4 Press <PICTURE> to exit from adjust
mode.
■
To return to the previous screen
Press <RETURN>.
■
To reset to defaults
When [Default] is selected, pressing <ENTER> resets
the adjustment values of all the displayed menus to
default.
When adjusting each item, pressing <DEFAULT>
resets the adjustment value of the item to default.
Note
● When displaying still picture with USB input (USB
media player), only the following settings have an
effect on the picture.
[Backlight], [Gamma], [Colour temperature]
[Picture mode] This menu switches to easy-to-
see pictures suitable to the picture
source or environment where this
unit is used.
[Vivid signage]
Suitable for signage applications
featuring more vivid and sharper
images in bright environments
such as a shop.
[Natural signage]
Suitable for signage applications
such as merchandise exhibition,
featuring natural tone images
with colour reproduction
emphasized under light.
[Standard]
Faithfully reproduces original
picture.
[Surveillance]
Tone-focused pictures with
brightness reduced suitable for
input from a monitoring camera.
[Graphic]
Suitable for PC input.
[DICOM]
Pictures close to the grayscale
standard DICOM Part14.
● The settings are memorised
separately for each input
terminal.
● In [ENGLISH(US)] OSD language, the [Picture
mode] is displayed as [PICTURE MENU].
Note
● DICOM is the abbreviation for “Digital Imaging and
Communications in Medicine”, which is a standard
for communications between medical imaging
devices. Although “DICOM” is used as a picture
mode name, this unit is not a medical device. Do
not use displayed images for such purposes as
diagnosis.
[Backlight] Adjusts luminance of the back light.
Darker ↔ Brighter
[Contrast] Selects the proper brightness and
density for the room.
Less ↔ More
● In [ENGLISH(US)] OSD language, [Contrast] is
displayed as [PICTURE].