Panasonic TH-55VF2HW 54.6" Full HD Video Wall Display - Manual (Page 8)

English
8
Safety Precautions
WARNING
■
Setup
This LCD Display is for use only with the following
optional accessories.
Use with any other type of optional accessories may
cause instability which could result in the possibility
of injury.
Securely install the installation mount of the
optional accessories. Ask an authorized dealer for
installation.
At least 2 people are required for installation.
• Installation Mount
TY-VK55LV2
• Early Warning Software
(Basic license/3-year license)
ET-SWA100 series
* 1
• Video Wall Manager
Auto Display Adjustment Upgrade Kit
TY-VUK10
* 2
* 1: Suffix of the part number may differ depending on
the license type.
* 2: Supports Ver1.12 or later.
Note
● The part number of the optional accessories are
subject to change without notice.
We are not responsible for any product damage, etc.
caused by failures in the installation environment even
during the warranty period.
Always be sure to ask a qualified technician to carry out
set-up.
Small parts can present choking hazard if accidentally
swallowed. Keep small parts away from young children.
Discard unneeded small parts and other objects,
including packaging materials and plastic bags/sheets to
prevent them from being played with by young children,
creating the potential risk of suffocation.
Do not place the Display on sloped or unstable
surfaces, and ensure that the Display does not hang
over the edge of the base.
• The Display may fall off or tip over.
Install this unit at a location with minimal vibration
and which can support the weight of the unit.
• Dropping or falling of the unit may cause injury or
malfunction.
Do not place any objects on top of the Display.
• If foreign objects or water get inside the Display, a
short-circuit may occur which could result in fire or
electric shock. If any foreign objects get inside the
Display, please consult your local Panasonic dealer.
Ventilation should not be impeded by covering
the ventilation openings with items such as
newspapers, table cloths and curtains.
For sufficient ventilation, see page 11.
Caution - For use only with UL Listed Wall Mount
Bracket with minimum weight/load 23.0 kg (50.7 lbs).
When installing the Display vertically, rotate
clockwise and be sure that the Power Indicator
comes to the downside.
(The Power Indicator is situated at the back.)
90
• The rotation direction is displayed on the rating
plate and back cover of this unit. Confirm it during
installation.
• If installed in different directions, heat is generated
and it may cause fire or damage to the Display.
Installation should be performed by installation
professionals.
Installing the Display incorrectly may lead to an accident
that results in death or serious injury.
• Specified Installation Mount (Optional) or a mounting
bracket that conform to VESA standards (VESA 400 ×
400) must be used. (see page 11)
• Before installation, be sure to check if the mounting
location has enough strength to support the weight
of the LCD display and the wall hanging bracket for
anti drop.
• If you terminate the use of the Display, ask
professionals to remove the Display as soon as
possible.
When mounting the Display on the wall, prevent the
mounting screws and power cable from contacting
metal objects inside the wall.
An electric shock may occur if they contact metal objects
inside the wall.
Do not place the display where it may be affected by
salt or corrosive gas.
• Doing so may cause the display to fall due to
corrosion. Also, the unit may malfunction.