Panasonic TH-55VF2HW 54.6" Full HD Video Wall Display - Manual (Page 60)

English
60
■
[Input change mode]: [Quick]
Promptly switches to the backup input if an
interruption of video occurs, and enables switching
between digital (HDMI / DIGITAL LINK / DVI-D1 /
DVI-D2) inputs.
Note
● The backup video signal needs to be in the same
format as the (main) input in use for viewing.
● Upon switching to the backup input, the video and
audio adjustment values for the (main) input used for
viewing will be inherited.
● This function will start operating once a video signal is
detected by both the input in use for viewing and the
backup input and the [Backup input change] item is
displayed as [Active].
● This function may not operate correctly depending on
the image playback device.
[Primary backup input]
Sets the first priority backup input.
[(None)] / [HDMI] / [DIGITAL LINK] / [DVI-D1] /
[DVI-D2]
The input that is of the same type as the one in use
for viewing will be greyed out.
[Secondary backup input]
Sets the second priority backup input.
[(None)] / [HDMI] / [DIGITAL LINK] / [DVI-D1] /
[DVI-D2]
The input that is of the same type as the one in use
for viewing will be greyed out.
[Auto switch back mode]
Sets whether or not to automatically return to the
former (main) input when the former input video
initially viewed is restored while viewing the video
of the backup input enabled by the operation of the
Backup Input function. (Failback)
[Disable]:
Unreturned
[Enable]:
Returned
[Changing mode]
Select speed of input switching.
[High speed]:
If switching between the same signal formats, it is
possible to switch within 1 second.
If switching between the different signal formats,
picture noise may be caused.
[Normal speed]:
If switching between the same signal formats, it is
possible to switch within 2 seconds.
If switching between the different signal formats, it
takes 3 to 4 seconds to switch but picture noise is
not caused.
[Backup input change]
Displays whether or not operating conditions for the
Backup Input function are met.
[Inactive]:
Indicates that the conditions are not met, and
inactivates the Backup Input function.
[Active]:
Indicates that the conditions are met, and activates
the Backup Input function.
[Main input]
Displays the (main) input initially used for viewing.
[Current input]
Displays whether the input currently in use for viewing
is the (main) input initially used for viewing or the
backup one.