Panasonic TH-55VF2HW 54.6" Full HD Video Wall Display - Manual (Page 68)

English
68
Set up timer
Sets the program to turn the power on with the specified
time and video input, or to turn the power off at the
specified time. Up to 20 programmes can be set.
Note
● When the current time is displayed as [- -], set [Date
and time] before setting [Set up timer]. (see page 68)
● When multiple programs are set at the same time,
the program with the smallest program number is
enabled.
● If [Power mode] is set to [Power on], executing the
program at power-on will switch to the input set for
[Input].
[Set up timer] - submenu screen
Setting Example
Program 1, Every Monday, 12:00,
Power On, Input: HDMI
12:00
Set up timer
Program
Timer function
1
On
Power on
HDMI
Day
Time
Power mode
Input
MONDAY
1
2
3
4
5
6
10:00 TUESDAY 2019/01/01
1 Set the program number.
2 To execute the program, set to [On].
The program is disabled when [Off] is set.
3 Set the day.
The program is executed every day when
[Everyday] is set.
4 Set the power On/Off.
5 Set the time.
Pressing once changes time 1 minute.
Pressing continuously changes time by 15
minutes.
6 Set the input.
Date and time
Set date and time. ([- -] shows no programme is set.)
[Date and time] - submenu screen
Date and time
Set
TUESDAY 10:00 2019/01/01
Year 2019
Month
Day
Hour
Minute 1
1
10
0
■
Set date and time
Select [Year / Month / Day / Hour / Minute].
Set the selected item.
Date and time
Set
TUESDAY 10:00 2019/01/01
Year 2020
Month
Day
Hour
Minute 1
1
10
0
Select [Set] and press <ENTER>.
99:99 2015/01/01
Date and time
Set
WEDNESDAY 18:00 2020/02/05
Year 2020
Month
Day
Hour
Minute 2
5
18
0
Note
● If the present date and time are not set, the time
settings for [Set up timer], [Screensaver], etc. cannot
be made.
● The present date and time setting is reset in the
following case.
When the main unit is left unattended for 7 days or
longer after the main unit is turned off with the <Main
power switch>, the power plug is removed, or power
failure has occurred, etc.
● Date and time cannot be set when [Year / Month /
Day / Hour / Minute] are set to [- -].