Panasonic TH-55VF2HW 54.6" Full HD Video Wall Display - Manual (Page 36)

English
36
Volume Adjustment
Press <VOL +> <VOL -> or <+ (Unit)> <- (Unit)> to
adjust volume.
Unit
MENU ENTER INPUT
20 Volume (Speaker out)
● The current sound volume level is memorised even if
the power is turned off.
● When [Maximum VOL level] is set to [On], the volume
can only be adjusted to the maximum point you set,
and the displayed value turns red when it reached its
maximum. (see page 78)
● When [Initial VOL level] is set to [On], the volume will
be at the set level when the display is turned on. (see
page 78)
Sound mute On / Off
It is useful when you want to mute the sound temporarily,
for example, when answering the phone or door.
Press <MUTE>.
● appears on the screen and the sound is muted.
Press again to reactivate the sound.
● It is also reactivated when the power is turned on / off
or the volume level is changed.
● While MUTE is active, is displayed as a reminder
after operation.
● In [ENGLISH(US)] OSD language, is displayed as
[MUTE].
OFF TIMER
The Display can be preset to switch to stand-by after a
fixed period. (30 min, 60 min, 90 min)
The setting switches each time <OFF TIMER> is
pressed.
● [0 min] → [30 min] → [60 min] → [90 min]
→ [0 min] (Cancel)
● When three minutes remain, the remaining time will
flash (Red). After that, it switches to stand-by.
● To see the Off timer remaining time, press
<RECALL>.
● The Off timer is cancelled if a power interruption
occurs. When the power is turned on later on, it will
be in stand-by condition.