Canon imagePROGRAF PRO-300 13" Photographic Inkjet Printer - Manual (Page 159)

Default Network Settings
LAN Connection Defaults
Item Default
Change wireless/wired LAN Wired LAN
Network name (SSID) BJNPSETUP
Wi-Fi security Disable
IP address ( IPv4 ) Auto setup
IP address ( IPv6 ) Auto setup
Set printer name * XXXXXXXXXXXX
Enable/disable IPv6 Enable
Enable/disable WSD Enable
Timeout setting 15 minutes
Enable/disable Bonjour Enable
Service name Canon PRO-300 series
LPR protocol settings Enable
RAW protocol Enable
LLMNR Enable
PictBridge communication Enable
Wired LAN DRX settings Enable
("XX" represents alphanumeric characters.)
* Default value depends on printer. To check value, use operation panel.
LAN settings
Wireless Direct Defaults
Item Default
Network name (SSID) DIRECT-abXX-PRO-300series *1
Password YYYYYYYYYY *2
Wi-Fi security WPA2-PSK (AES)
Connection request confirmation Displayed
159