Canon imagePROGRAF PRO-300 13" Photographic Inkjet Printer - Manual (Page 71)

Reset settings
Select this setting item from Printer settings on Various settings .
Important
• The administrator password is required to change this setting if the administrator password is enabled.
You can set the settings back to the default.
• Web service setup only
Sets the Web service settings back to the default.
• LAN settings only
Sets the LAN settings other than the administrator password back to the default.
• Settings only
Sets the settings such as the paper size or media type back to the default.
• Reset all
Sets all settings you made to the printer back to the default. The administrator password specified for
the printer is set to the default setting.
Note
• You cannot set the following setting items back to the default:
• The language displayed on the LCD
• The current position of the print head
• CSR (Certificate Signing Request) for encryption method (SSL/TLS) setting
• Media information registered to the printer by using Media Configuration Tool
71