Setting password, Setting administrator password – Canon imagePROGRAF PRO-300 13" Photographic Inkjet Printer User Manual
Page 92
Setting Password
Each of passwords for administrator and standard user can be set.
When logging in with password for administrator, all settings can be changed.
When logging in with password for standard user, some of the settings can be changed.
When logging in with password for administrator, you can restrict the function for standard user.
Setting Administrator Password
Setting Standard User Password
Note
• Password can be set only when you are logged in administrator mode.
Setting Administrator Password
Change the administrator password by following the steps below.
Important
• The password is set at the time of purchase. The password is the printer serial number. The printer
serial number is printed on the sticker attached on the printer. It consists of 9 alphanumeric
characters (four alphabets followed by five numbers).
1.
Display printer status on web browser.
2.
Select
Security
.
The menus are displayed.
3.
Select
Administrator password setting
.
4.
Select
Change administrator password
.
If the administrator password is not set, registration confirming message is displayed. Select
Yes
.
When message is displayed again, select
OK
.
5.
Select range where administrator password is valid and select
OK
.
Remote UI and other tools
Entering the administrator password is required to change the setting items using the Remote UI
or some software.
Operation panel/Remote UI/other tools
Entering the administrator password is required to change the setting items using the operation
panel of the printer, the Remote UI, or some software.
6.
Enter a password, and then select
OK
.
92