Setting the stapling margin – Canon imagePROGRAF PRO-300 13" Photographic Inkjet Printer User Manual
Page 359
Advertising
![background image](/files/875996/content/doc359.png)
Setting the Stapling Margin
The procedure for setting the staple side and the margin width is as follows:
1.
Open the
2.
Specify the side to be stapled
Check the position of the stapling margin from
Stapling Side
on the
Page Setup
tab.
The printer analyzes the
Orientation
and
Page Layout
settings, and automatically selects the best
staple position. When you want to change the setting, select from the list.
3.
Set the margin width
If necessary, click
Specify Margin...
and set the margin width, and then click
OK
.
Note
• The printer automatically reduces the print area depending on the staple position margin.
359
Advertising