Canon imagePROGRAF PRO-300 13" Photographic Inkjet Printer User Manual
Page 521
Advertising
4.
Select
Advanced
and press the
OK
button.
5.
Select
TCP/IP settings
and press the
OK
button.
• If you specify IPv4 address:
1.
Select
IPv4
.
2.
Select
Yes
on the displayed screen.
3.
Select
IP address
.
4.
Select
Manual setup
.
Selecting
Auto setup
specifies the IP address automatically.
5.
Enter IP address.
6.
Select
OK
.
7.
Enter subnet mask.
8.
Select
OK
.
9.
Enter default gateway.
10.
Select
OK
.
The IPv4 address has been specified.
• If you specify IPv6 address:
1.
Select
IPv6
.
2.
Select
Yes
on the displayed screen.
3.
Select
Enable/disable IPv6
.
4.
Select
Enable
.
The IPv6 address has been specified.
Important
• If firewall is enabled on the computer, printers on a different subnet may not be detected.
Disable firewall.
521
Advertising