Setting administrator password on operation panel – Canon imagePROGRAF PRO-300 13" Photographic Inkjet Printer User Manual
Page 69
Setting Administrator Password on Operation Panel
You can specify or disable the administrator password.
Specifying the administrator password requires you to enter the password to use the items or change the
settings below.
•
Web service setup
•
LAN settings
•
Other printer settings
•
Language selection
•
Firmware update
•
Energy saving settings
•
Quiet setting
•
Auto maintenance settings
•
Administrator password settings
•
Reset settings
(except for
Reset all
)
Follow the procedure below to specify the administrator password.
1.
Check that printer is turned on.
2.
Select
Various settings
on HOME screen and press the
OK
button.
3.
Use the
buttons to select
Printer settings
and press the
OK
button.
4.
Use the
buttons to select
Administrator password settings
and press the
OK
button.
5.
When confirmation screen to specify administrator password is displayed, select
Yes
and
press the
OK
button.
If an administrator password is not specified, the register confirmation message appears. Select
Yes
and
press the
OK
button. When the message appears again, press the
OK
button.
Important
• The administrator password is set at the time of purchase. The printer's serial number is used as
the password.
For the administrator password, refer to Administrator Password.
69