Switching the paper source to match the purpose – Canon imagePROGRAF PRO-300 13" Photographic Inkjet Printer User Manual
Page 374
Switching the Paper Source to Match the Purpose
In this printer, there are two paper sources, a manual feed tray and a top feed.
You can facilitate printing by selecting a paper source setting that matches your media type or purpose.
The procedure for setting paper source is as follows:
You can also set the paper source on the
Quick Setup
tab.
1.
Open the
2.
Select the media type
Select the type of paper loaded in the printer from the
Media Type
list on the
Main
tab.
3.
Select the paper source
From the
Paper Source
list, select the paper source that matches your purpose.
Manual Feed
Paper is supplied from the manual feed tray in the back.
Important
• When
A5
,
B5
,
4"x6" 10x15cm
,
5"x7" 13x18cm
,
7"x10" 18x25cm
,
L 89x127mm
,
2L
127x178mm
,
Hagaki 100x148mm
, or
Hagaki 2 200x148mm
is selected for
Page Size
on the
Page Setup
tab, paper cannot be supplied from the manual feed tray in the back.
• When
Plain Paper
,
Hagaki A
,
Ink Jet Hagaki
, or
Hagaki
is selected for
Media Type
on the
Main
tab, paper cannot be supplied from the manual feed tray in the back.
Top Feed
Paper is fed from the top feed.
374