Canon imagePROGRAF PRO-300 13" Photographic Inkjet Printer - Manual (Page 283)

Network Specifications
Communication protocol SNMP, HTTP, TCP/IP (IPv4/IPv6)
Wired LAN Supported Standards: IEEE802.3u (100BASE-TX) / IEEE802.3 (10BASE-T)
Transfer speed: 10 Mbps/100 Mbps (auto switching)
Security: IEEE802.1X (EAP-TLS/EAP-TTLS/PEAP)
Wi-Fi Supported Standards: IEEE802.11n / IEEE802.11g / IEEE802.11b /
IEEE802.11a
Frequency bandwidth: 2.4 GHz / 5 GHz
Channel:
2.4 GHz: 1-11 or 1-13
5 GHz: W52, W53, W56, W58
* Wireless Direct cannot be used in the 5GHz band.
* Frequency bandwidth and available channels differ depending on country or
region.
Communication distance: Indoors 164 feet/50 m
* Effective range varies depending on the installation environment and location.
Security:
WEP (64/128 bits)
WPA-PSK (TKIP/AES)
WPA2-PSK (TKIP/AES)
Setup:
WPS (Push button configuration/PIN code method)
Easy wireless connect
Minimum System Requirements
Conform to the operating system's requirements when higher than those given here.
Windows
Operating System Windows 10, Windows 8.1, Windows 7 SP1
Note: Operation can only be guaranteed on a PC with pre-installed Windows
7 or later.
Printer driver, IJ Printer Assistant Tool, and IJ Network Device Setup Utility
support the following OS:
Windows Server 2008 R2 SP1, Windows Server 2012 R2, Windows Server
2016, and Windows Server 2019.
Hard Disk Space 2.0 GB or more
Note: For bundled software installation.
The necessary amount of hard disk space may be changed without notice.
283