Canon imagePROGRAF PRO-300 13" Photographic Inkjet Printer - Manual (Page 163)

Printing Network Settings
Use the operation panel to print the printer's current network settings.
Important
• The network settings printout contains important information about your network. Handle it with care.
1. Check that printer is turned on and display the Home screen.
If the HOME screen is not displayed, press the HOME button.
2. Load three sheets of A4 or Letter-sized plain paper.
3. Select LAN settings on the Home screen and press the OK button.
4. Select Print details and press the OK button.
5. Check message, select Yes and press the OK button.
6. When the confirmation screen for printing passwords appears, select Yes or No and press
the OK button.
The printer starts printing the network setting information.
The following information on the printer's network setting is printed out. (Some setting values are not
displayed depending on the printer settings.)
Item Num-
ber Item Description Setting
1 Product Information Product information –
1-1 Product Name Product name XXXXXXXX
1-2 ROM Version ROM version XXXXXXXX
1-3 Serial Number Serial number XXXXXXXX
2 Network Diagnostics Network diagnostics –
2-1 Diagnostic Result Diagnostic result XXXXXXXX
2-2 Result Codes Result codes XXXXXXXX
2-3 Result Code Details Result code details http://canon.com/ijnwt
3 Wireless LAN Wireless LAN Enable/Disable
3-2 Infrastructure Infrastructure Enable/Disable
3-2-1 Signal Strength Signal strength 0 to 100 [%]
163