Canon imagePROGRAF PRO-300 13" Photographic Inkjet Printer - Manual (Page 358)

Important
• If the application software that created the document has a function for specifying height and width
values, use the application software to set the values. If the application software does not have such a
function or if the document does not print correctly, perform the above procedure from the printer driver
to set the values.
Note
• Printing may be disabled depending on the size of the specified user-defined media.
For information about printable sizes for user-defined media, see " Supported Media Types ."
• If the paper settings in the printer driver differ from the paper information registered on the printer, an
error may occur. For instructions on what to do if an error occurs, see " Register Paper Information ."
For details about the paper information to be registered on the printer, see the following:
• Paper Settings on the Printer Driver and the Printer (Media Type)
• Paper Settings on the Printer Driver and the Printer (Paper Size)
358