Canon imagePROGRAF PRO-300 13" Photographic Inkjet Printer - Manual (Page 458)

Defaults
Restores all the settings you have changed to their default values.
Clicking this button restores all the settings on the current screen to their default values (factory
settings).
Paper Detailed Settings dialog box
Drying Time
Allows you to set how long the printer rests before printing of the next page starts.
If the next page is ejected before the print surface dries completely and the paper becomes stained,
set a longer ink drying time.
Print Head Height
Allows you to widen the gap between the print head and the paper to reduce paper abrasion when
printing high density pages. To reduce paper abrasion, select
Avoid Paper Abrasion .
Custom dialog box
Set the quality level, and select the desired print quality.
Quality
You can use the slider bar to adjust the print quality level.
Important
• Certain print quality levels cannot be selected depending on the settings of Media Type .
Note
• The Highest , Standard , or Fast print quality modes are linked with the slider bar. Therefore
when the slider bar is moved, the corresponding quality and value are displayed on the left. This
is the same as when the corresponding radio button is selected for
Print Quality on the Main
tab.
Color Adjustment Tab
This tab allows you to adjust the color balance by changing the settings of the Cyan , Magenta , Yellow ,
Tone , Brightness , and Contrast options.
Preview
Shows the effect of color adjustment.
The color and brightness change when each item is adjusted.
Note
• The graphic is in monochrome when the Black and White Photo Print check box is checked.
View Color Pattern
Displays a pattern for checking color changes produced by color adjustment.
If you want to display the preview image with a color pattern, check this check box.
458