Canon imagePROGRAF PRO-300 13" Photographic Inkjet Printer User Manual
Page 356
Auto
The printer automatically sets the areas to be clear-coated and whether clear coating is to be
performed.
It may be possible to reduce the ink consumption of the chroma optimizer (CO) or to accelerate the
print speed.
Overall
The printer clear-coats the entire print area.
If selecting
Auto
produced unsatisfactory clear coating effects, selecting
Overall
may improve the
results.
Important
• On the
Quick Setup
or
Main
tab, look at
Media Type
. If a media type other than
Photo Paper
Plus Glossy II A
,
Photo Paper Pro Platinum
,
Photo Paper Pro Luster
,
Photo Paper Plus
Semi-gloss
,
Photo Paper Pro Crystal Grade
,
Lightweight Photo Paper
,
Heavyweight Photo
Paper
, or
Baryta Photo Paper
is selected, you cannot select
Overall
.
• If
Overall
is selected and the media type is changed to one that cannot use
Overall
, the clear
coating area setting is changed to
Auto
.
4.
Click
OK
When printing is performed, the clear coating effect that was set is added when the document is printed.
356