Canon imagePROGRAF PRO-300 13" Photographic Inkjet Printer - Manual (Page 457)

Print Quality
Selects your desired printing quality.
Select one of the following to set the print quality level that is appropriate for the purpose.
Important
• Depending on the Media Type settings, the same print results may be produced even if the Print
Quality is changed.
Highest
Prints with quality as the highest priority.
Standard
Prints with average speed and quality.
Fast
Gives priority to printing speed over print quality.
Custom
Select this when you want to set the printing quality level individually.
Set...
Select Custom for Print Quality to enable this button.
Open the Custom dialog box . You can then individually set the print quality level.
Color/Intensity
Selects color adjustment method.
Auto
Cyan , Magenta , Yellow , Brightness , Contrast , and so on are adjusted automatically.
Manual
Select when you set the individual settings such as Cyan , Magenta , Yellow , Tone , Brightness ,
Contrast , etc. and Color Correction method.
You can also specify Clear Coating Area settings.
Set...
Select Manual for Color/Intensity to enable this button.
In the Manual Color Adjustment dialog box, you can adjust individual color settings such as
Cyan , Magenta , Yellow , Tone , Brightness , and Contrast on the Color Adjustment tab , and
select the Color Correction method on the Matching tab .
You can also set clear coat settings on the Clear Coating tab .
Note
• If you want to use an ICC profile to adjust colors, use the Manual Color Adjustment dialog
box to set the profile.
Black and White Photo Print
Black and white photo print refers to a function that converts data to monochrome data when printing
your document.
Check this check box to print a color document in monochrome.
Preview before printing
Shows what the print result will look like before you actually print the data.
Check this check box to display a preview before printing.
457