Canon imagePROGRAF PRO-300 13" Photographic Inkjet Printer - Manual (Page 51)

IPv6 stateless address 4 XXXX: XXXX: XXXX: XXXX:
XXXX: XXXX: XXXX: XXXX (32 characters)
IPv6 stateless prefix length 4 XXX (up to 3 digits)
IPv6 default gateway 1 XXXX: XXXX: XXXX: XXXX:
XXXX: XXXX: XXXX: XXXX (32 characters)
IPv6 default gateway 2 XXXX: XXXX: XXXX: XXXX:
XXXX: XXXX: XXXX: XXXX (32 characters)
IPv6 default gateway 3 XXXX: XXXX: XXXX: XXXX:
XXXX: XXXX: XXXX: XXXX (32 characters)
IPv6 default gateway 4 XXXX: XXXX: XXXX: XXXX:
XXXX: XXXX: XXXX: XXXX (32 characters)
MAC address (Wi-Fi) XX:XX:XX:XX:XX:XX (12 characters)
IPsec settings Enable (ESP) / Enable (ESP & AH) / Enable (AH) / Disa-
ble
Printer name XXXXXXXXXXXXXXX (up to 15 characters)
Bonjour service name XXXXXXXXXXXXX
XXXXXXXXXXXXX
XXXXXXXXXXXXX
XXXXXXXXXXXXX (up to 52 characters)
("XX" represents alphanumeric characters.)
To change the setting, select Settings .
◦ Enable/disable Wi-Fi
Select Enable to wirelessly connect via wireless router.
◦ Wi-Fi setup
Select how to setup Wi-Fi.
◾ Easy wireless connect
Select if you specify the settings of the access point information to the printer directly from a
device (e.g. smartphone, or tablet) without operating the wireless router. Follow the on-screen
instructions of the connecting device for the setup procedure.
◾ Manual connect
Select when you perform settings for Wi-Fi manually using the operation panel of the printer.
◾ WPS (Push button method)
Select when you perform settings for Wi-Fi using a wireless router supporting a Wi-Fi Protected
Setup (WPS) push button method. Follow the on-screen instructions during setup.
◾ Other connection types
◾ Manual connect (adv.)
Select when you perform settings for Wi-Fi manually. You can specify multiple WEP keys.
◾ WPS (PIN code method)
51