Canon imagePROGRAF PRO-300 13" Photographic Inkjet Printer - Manual (Page 52)

Select when you perform settings for Wi-Fi using a wireless router supporting a Wi-Fi
Protected Setup (WPS) PIN code method. Follow the on-screen instructions during setup.
◦ Advanced
For details on each setting item:
Advanced
• Wireless Direct
The following setting information on the Wireless Direct connection is displayed. (Some items are not
displayed depending on printer settings.)
Items Setting
Connection Enable / Disable
Network (SSID)/device name DIRECT-XXXX-PRO-300series
Password XXXXXXXXXX (10 characters)
Communication mode Wireless Direct
Channel 3
Wi-Fi security WPA2-PSK (AES)
No. of printers connected now XX / XX
IPv4 address XXX. XXX. XXX. XXX (12 characters)
IPv4 subnet mask XXX. XXX. XXX. XXX (12 characters)
IPv4 default gateway XXX. XXX. XXX. XXX (12 characters)
IPv6 link-local address XXXX: XXXX: XXXX: XXXX:
XXXX: XXXX: XXXX: XXXX (32 characters)
IPv6 link-local prefix length XXX (up to 3 digits)
MAC address (Wi-Fi) XX:XX:XX:XX:XX:XX (12 characters)
IPsec settings Enable (ESP) / Enable (ESP & AH) / Enable (AH) / Dis-
able
Printer name XXXXXXXXXXXXXXX (up to 15 characters)
Bonjour service name XXXXXXXXXXXXX
XXXXXXXXXXXXX
XXXXXXXXXXXXX
XXXXXXXXXXXXX (up to 52 characters)
("XX" represents alphanumeric characters.)
To change the setting, select Settings .
◦ Enable/disable Wireless Direct
Select Yes to wirelessly connect without wireless router.
◦ Change SSID/device name
Changes the identifier (SSID/the printer's name displayed on a Wi-Fi Direct compatible device) for
Wireless Direct.
52