Canon imagePROGRAF PRO-300 13" Photographic Inkjet Printer - Manual (Page 64)

Paper-related settings
Select this setting item from Printer settings on Various settings .
• Top feed paper settings
Set the paper size and the media type of paper loaded in the top feed.
• Manual feed tray paper settings
Set the paper size and the media type of paper loaded in the manual feed tray.
• Check paper replacement
If you select Yes , the printer detects that the paper is loaded or removed.
When the paper registration screen is displayed after loading paper, register the paper size and the
media type.
• Det. paper setting mismatch
If you select Yes , the printer detects whether the paper size and the media type are the same as those
registered. If printing starts with the settings that do not match, an error message appears on the LCD.
Register Paper Information
• Advanced paper settings
Perform the following settings for each media type.
◦ Paper thickness (head height)
◦ Extension for borderless printing
◦ Unidirectional printing
◦ Pause between scans
◦ Pause between pages
◦ Detect paper width
If you are concerned about the printout results such as uneven colors, select ON on Unidirectional
printing .
Selecting Reset paper settings for all paper , Yes and pressing the OK button initializes the settings.
Entering the administrator password is required if it is enabled.
• Print advanced paper settings
Selecting Yes and pressing the OK button prints out each setting specified in Advanced paper
settings .
• Reset paper settings for all paper
Selecting Yes and pressing the OK button initializes each setting specified in Advanced paper
settings .
Entering the administrator password is required if it is enabled.
64