Symmetricom EDGE CLOCK 1000 - Manual (Page 117)

097-58001-02 Revision G – April 2008 TimeProvider User’s Guide 117
Chapter 4 Provisioning the TimeProvider
Provisioning the Input Reference
Sample Command
SET-TH::GPS:TS1000::MASK=GPS-R;
This command sets the GPS input performance monitoring threshold to a mask
value of GPS-R.
<aid> <keyword> <value> Description
GPS, PRS,
INP1, INP2 MASK DEFAULT
GPS-R
PRS
DS1
OCN
PRC
TYPEI
TYPEII Set the MTIE-x and FFOFF-60 thresholds to
predefined settings.
Table 4-2 describes the
values for each setting.
MTIE-1 1 to 5 000 000 1-second MTIE observation threshold in ns
GPS
(cont’d) MTIE-5 1 to 5 000 000 5-second MTIE observation threshold in ns
MTIE-10 1 to 5 000 000 10-second MTIE observation threshold in ns
MTIE-50 1 to 5 000 000 50-second MTIE observation threshold in ns
MTIE-100 1 to 5 000 000 100-second MTIE observation threshold in ns
MTIE-500 1 to 5 000 000 500-second MTIE observation threshold in ns
FFOFF-60 100 to 10 000 000 Set FFOFF threshold for 60-second
calculation period, in ps/s
Table 4-2. Default Mask Parameters
MTIE-1 MTIE-5 MTIE-10 MTIE-50 MTIE-100 MTIE-500 FFOFF-60
Default 10 000 50 000 100 000 500 000 1 000 000 5 000 000 10 000 000
GPS-R 150 150 150 150 150 155 50 000
PRS 10 10 12 25 39 155 1000
DS1 302 312 325 325 550 1002 12 000
OCN 600 1000 1000 1000 1000 1002 370 000
PRC 25 25 25 25 39 155 1000
TYPE I 750 750 1000 2000 2000 2000 2900
TYPE II 302 312 325 425 1000 1000 1000