Symmetricom EDGE CLOCK 1000 - Manual (Page 84)

Chapter 3 Installing the TimeProvider
Firmware Features
84 TimeProvider User’s Guide 097-58001-02 Revision G – April 2008
Firmware Features
Table 3-10 describes the features provided in recent releases of the operating
firmware for the IOC and IMC.
Table 3-10. Firmware Feature Matrix
IMC Release IOC Release Features Added
1.01.04 1.01.02 E1/T1/2.048 MHz signals
Quartz IOC
SSMs
1.02.01 1.02.12 GPS
Rubidium IOC
Japanese input/output signals
Composite Clock signals
1.03.03 1.03.04 T1 Retimer
Input/output port labeling
Enhanced event log management
1.04.02 1.04.02 NTP
TIA/EIA-B-422 output signals
Integrated IMC with TPIU
(IMC/TPIU)
Programmable E1 SSM bit position
Programmable CAS/CCS framing
on inputs and outputs
1.04.02 1.04.06 E1 Retimer
8-Port DB9 Output module
Improved Pull-in/Hold-in range
1.05.04 1.05.00 SNMP