Symmetricom EDGE CLOCK 1000 - Manual (Page 51)

097-58001-02 Revision G – April 2008 TimeProvider User’s Guide 51
Chapter 2 Engineering and Ordering Procedures
Ordering and Parts List
Ordering and Parts List
Use Table 2-5 to identify the available TimeProvider shelf types. The front and rear
access main shelf includes a free copy of the TimeCraft craft GUI (990-46770-99)
with each system. All IOCs, IMCs, and Input and Output Connector modules are
sold separately.
Ordering the Cable Management Option
Symmetricom offers a cable management kit made of ABS plastic to ensure a neat
installation. This kit is 1 RU (Rack Unit) high, and includes two cable trays per kit.
The part number is 093-55595-11.
Ordering an NTP or SNMP License
To enable the NTP or SNMP option within the TimeProvider system, you must enter
a key into the IMC or IMC/TPIU card. This key is unique to each system and is
based on the serial number of the IMC or IMC/TPIU card.
To order the NTP option with a new TimeProvider system, or for an
already-installed unit, include part number 920-58000-01.
To order the SNMP option with a new TimeProvider system, or for an
already-installed unit, include part number 920-58002-01.
For an already-installed system, you must also provide the serial number of the IMC
or IMC/TPIU card with the order to generate the required password.
Once the order is received, a certificate will be issued to the user to indicate the
password with the associated TL1 command to activate the NTP option.
Table 2-5. TimeProvider Shelves
Model Outputs Part Number
1000
Front Access Main Shelf 8 to 32
(1 to 4 Output Connector modules) 990-58001-01
1000
Front Access Expansion Panel 33 to 64
(1 to 4 Output Connector modules) 990-58002-01
1100
Rear Access Main Shelf 8 to 32
(1 to 4 Output Connector modules) 990-58101-01
1100
Rear Access Expansion Panel 33 to 64
(1 to 4 Output Connector modules) 990-58102-01