Symmetricom EDGE CLOCK 1000 - Manual (Page 57)

097-58001-02 Revision G – April 2008 TimeProvider User’s Guide 57
Chapter 3 Installing the TimeProvider
Rack Mounting
Expansion Panel
The optional Expansion panel uses a bracket to position the panel at the same
depth as the shelf; expansion brackets are used for 23-inch racks.
Cable Management Tray
The optional Cable Management tray (093-55595-11) allows you to neatly bundle
input and output cables from the rear-access TimeProvider Model 1100. A sample
installation with the cable management tray is shown in
Figure 3-2 .
1. Attach the rack mounting ears to the shelf using 8-32 x 3/8-inch screws. Ensure
that the ears are attached at equal distances from the front of the unit, as shown
in
Figure 3-1 or Figure 3-2 .
2. Mount the shelf to the front of the equipment rack rails with four screws and
associated hardware. Use the proper screws for the equipment rack.
3. Mount the optional Expansion panel and/or Cable Management tray as shown in
the following figures.
Figure 3-1. Installing the Model 1000 Shelf, Expansion Panel, and Cable Management tray –
19-inch Rack