Symmetricom EDGE CLOCK 1000 - Manual (Page 73)

097-58001-02 Revision G – April 2008 TimeProvider User’s Guide 73
Chapter 3 Installing the TimeProvider
Making Connections
Figure 3-20. Antenna-to-Shelf Cabling
To install the antenna:
1. Attach the antenna mounting bracket to a 1-inch (2.5 cm) diameter pipe or wood
post.
– If you are mounting the bracket to a pipe, assemble as shown in
Figure 3-21 . Slide the two V-bolts over the pipe, and through the mounting
bracket slots; then place the provided four washers and four nuts over the
V-bolts, against the mounting bracket. Leave the V-bolts loose enough to
allow for final adjustments.