Installing the antenna bracket on a pipe, Installing the antenna bracket on a post – Symmetricom EDGE CLOCK 1000 User Manual
Page 74
Chapter 3 Installing the TimeProvider
Making Connections
74
TimeProvider User’s Guide
097-58001-02 Revision G – April 2008
Figure 3-21. Installing the Antenna Bracket on a Pipe
– If you are mounting the bracket to a wood post, assemble as shown in
. Install the provided two self-tapping screws in two diagonally
positioned mounting bracket slots, and attach to the post.
Figure 3-22. Installing the Antenna Bracket on a Post
Mount the antenna and mast assembly to the “L” bracket.
2. Connect the mast to the flange using PVC glue.
3. Feed an RG58 (060-58545-xx) cable through the bottom of the mast as illustrated.
See
for specific cable lengths.
4. Connect the cable to the antenna “pigtail” and pull the cable back through the mast.
5. Mount the antenna to the mast.