Symmetricom EDGE CLOCK 1000 - Manual (Page 199)

097-58001-02 Revision G – April 2008 TimeProvider User’s Guide 199
Chapter 7 Specifications of the TimeProvider
Outputs
JCC4 Signals
Amplitude 1.0 V
p
±0.1 V
Termination Impedance 110
Ω
8k Signals
Amplitude 4 V p-p ± 10%
Termination Impedance 100
Ω
1.544 MHz Signals
Amplitude 0 dBm ± 3 dB
Wave Shape Sine wave
Termination Impedance 75
Ω
6.312 MHz Signals
Amplitude 0 dBm ± 3 dB
Wave Shape Sine wave
Termination Impedance 75
Ω
TIA/EIA-B-422 Signals
Amplitude 2 to 6 V p-p
Termination Impedance 100
Ω balanced
Wave Shape Square wave, 50% duty cycle
Connector type Wire-wrap
Jitter < 0.03 UI
Cable Length Drive 80 m (266 ft), using 24 AWG twisted pair
Table 7-5. Output Signal Specifications (Continued)
Parameter Specification