Symmetricom EDGE CLOCK 1000 - Manual (Page 208)

Appendix A Factory Default Values
Default Equipment Parameters
208 TimeProvider User’s Guide 097-58001-02 Revision G – April 2008
Default Equipment Parameters
E422-related alarms
E422FAULT IMMED No NA NA NA
RTM-related Alarms
S1LOS IMMED No MN MN MN
S2LOS IMMED No NA NA NA
EXSLIP IMMED No NA NA NA
RTMFAULT IMMED No NA NA NA
Table A-3. Default Equipment Parameters
Parameter Default Value
System-Level Parameter (<aid>=SYS)
INACTTIME 0 (no timeout)
LOGECHO ENABLE
ELEVTIME DISABLE
SYSMODE SSU
Local/Remote Comm Port Parameters (<aid>=COMp)
AOMERGE ENABLE
BAUD 9600
ECHO DISABLE
FLOW NONE
TIDQUIET DISABLE
Ethernet Parameters (<aid>=COMI)
AOMERGE ENABLE
IPGATE 127.0.0.1
IPADDR 127.0.0.1
Table A-2. Default Alarm Settings (Continued)
Alarm ID
Default
Error Delay
Error Delay
Editable?
Default Alarm Level
SSU Mode PRR Mode SUB Mode