Symmetricom EDGE CLOCK 1000 - Manual (Page 97)

097-58001-02 Revision G – April 2008 TimeProvider User’s Guide 97
Chapter 4 Provisioning the TimeProvider
Managing the User List
Sample Command
ACT-USER::TECHNICIAN:TS1000::TECH01!;
This command logs in the user named Technician.
Autonomous Message
TP-SSU 03-10-24 10-18-24
A 1170 REPT EVT
“IMC:NA,LOGIN,NSA,03-10-24 10-18-24:\”USER LOGGED IN,
TECHNICIAN\””
;
Error Response
TP-SSU 03-10-24 10-18-24
M 04 DENY
<errcode>
”UNAUTHORIZED ACCESS TO THIS SYSTEM IS PROHIBITED.”
;
Logging Out
Use the following TL1 command to terminate a session and log out of the system.
Security-level users can terminate any other user. The username is not
case-sensitive, but it must be spelled exactly as assigned.
CANC-USER:[<tid>]:[<uid>]:[<ctag>];
This command has a default access level of USER.
Parameter <uid> Value Description
<uid> <username> Up to 20 case-insensitive characters Assigned user
name
<pid> password Up to 20 case-sensitive characters. Must include
at least two non- alphabetic and one special
character (any printing character other than a
letter, number, comma, colon, or semicolon. For
case-sensitive passwords, enclose the <pid> in
quotes, for example “sYmm!23” Assigned
password
<uid> Value Description
null Terminates the current user’s session and
logs the user off the system
<uid> Up to 20 case-
insensitive characters Allows a user at the ADMIN or SECURITY
level to terminate another user’s session