Sharp AR-M162 - Manual (Page 105)

12
PRINTER SHARING
SHARED PRINTER SETTINGS
Settings on the computer to which the machine is directly
connected
Follow the steps below to use the computer directly connected to the machine as a print server. If your operating
system is Windows 95/98/Me, start from step 1. If your operating system is Windows NT 4.0, 2000 or XP, open the
control panel and then start from step 6.
1
Click the [Start] button, point to
[Settings] and then click [Control
Panel].
2 Double-click the [Network] icon ( ).
3
Click the [File and Print Sharing]
button.
4 Enable [I want to be able to allow
others to print to my printer(s).] by
clicking the checkbox, and then click
the [OK] button.
5 Click the [OK] button in the [Network]
dialog box.
6 Click [Printers and Other Hardware] in
the [Control Panel], and click [Printers
and Faxes].
In operating systems other than Windows XP,
double-click the [Printers] icon.
7 Click the [SHARP AR-XXXX] printer
driver icon and select [Sharing] from
the [File] menu.
8
Configure the settings for sharing and
then click the [OK] button.
☞
CLIENT SETTINGS (page 13)
For information on the settings, refer to your operating manual or to the help files for your operating system. Note
If the [Network] icon does not appear in
Windows Me, click [view all Control Panel
options].
If a message appears asking you to restart
the computer, click the [Yes] button and
restart the computer. After restarting the
computer, open the printer folder and
continue the setup procedure from Step 6.
Note
Note
For information on a setting, click the
button at the top-right of the dialog box and
then click the setting to display Help.
Note