Sharp AR-M162 - Manual (Page 269)

25
HOW TO USE THE NETWORK SCANNER FUNCTION
2
TRANSMITTING A TWO-SIDED ORIGINAL
Follow these steps to automatically transmit a two-sided original. (This is only possible on models that have an RSPF installed.)
1
Make sure the machine is in scan
mode.
When the SCAN indicator is lit,
the machine is in scan mode. If
the indicator is not on, press
the [SCAN] key. If auditing
mode has been enabled for the
scan function in the key
operator programs, a message
will appear prompting you to enter your account number
when you switch to scan mode. Enter your account
number (five digits) with the numeric keys. (
Page 19 )
2 Place the original(s) in the document
feeder tray.
For information on placing an original, see "4. COPY
FUNCTIONS" of the "Operation manual (for general
information and copier)".
3 Check the original size.
Press the [ORIGINAL SIZE] key to open the original
size selection screen. See
"MANUALLY SETTING THE
SCANNING SIZE" (page 26) to set the original size.
4 Press the [DUPLEX SCAN] key.
The duplex mode
selection screen appears.
5
Select "2-SIDED" with the [ ] or [ ]
key.
6 Press the [OK] key.
The duplex original type
selection screen appears.
7 Select booklet or tablet for the duplex
original type with the [
] or [ ] key.
8 Press the [OK] key.
You will return to the base screen and the duplex
scanning mode icon will appear.
9 Continue from step 4 of "BASIC
TRANSMISSION PROCEDURE" (
page 20 ).
Do not use an original that is not a standard size (11" x 17", 8-1/2" x 14", 8-1/2" x 11", 8-1/2" x 11"R, 5-1/2" x 8-1/2", A3, B4, A4, A4R, B5, B5R, or A5).
Otherwise a scanning error or cut-off image may result.
Note
COPY LINE DATA
SCAN
FAX
PRINT
EXP
SCAN COL
OM AUTO % OUTPUT DUPLEX
SPEC
ESS FORMAT ORIGINAL SIZE DUPLEX SCAN
DUPLEX SCAN ORIGINAL SIZE ESS BROADCAST
ORIGINAL SIZE
11x17
8 x14
8 x11
INCH
1
2
1
2
O % OUTPUT DUPLEX
SPECIAL FUNCTI
MAT ORIGINAL SIZE DUPLEX SCAN
DUPLEX SCAN ORIGINAL SIZE CAST
DUPLEX SCAN
1-SIDED
2-SIDED
GH
PQR
DUPLEX
SPECIAL FUNCTION
DUPLEX SCAN
DUPLEX SCAN
1-SIDED
2-SIDED
GHI
OK BACK
DUPLEX STYLE
BOOKLET
OK
• Two-sided scanning is not possible when "COLOR MODE" is set to "COLOR" or "GRAY".
• Booklets and tablets
Two-sided originals that are bound at the side are booklets, and two-sided
originals that are bound at the top are tablets.
• Two-sided scanning mode turns off after the transmission is finished. Two-sided
scanning mode can also be canceled by pressing the [CA] key.
• Two-sided scanning is only possible when an RSPF is used. Automatic scanning
of both sides of an original is not possible when the document glass is used.
• Two-sided scanning of originals longer than 11" x 17" (A3) is not possible.
• To cancel two-sided scanning, select "1-SIDED" in step 5 and then press the [OK] key.
Note
BOOKLET TABLET