Sharp AR-M162 - Manual (Page 23)

21
BEFORE USING THE PRODUCT
1
CHANGING THE PAPER SIZE SETTING OF A TRAY
If the size of the loaded paper is different from the size shown in the display, follow the steps below to change the
paper size setting of the tray.
The paper size setting cannot be changed during copying, printing, fax printing (when the fax option is installed), or
interrupt copying, or when a misfeed has occurred. However, if the machine is out of paper or out of toner, the paper
size setting can be changed during copying, printing, and fax printing.
See "PAPER" (page 18) for information on the specifications for the types and sizes of paper that can be loaded in
the paper trays.
The paper size cannot be set for the bypass tray.
1 Press the [SPECIAL FUNCTION] key.
The special function
screen will appear.
The screen shown above is the copy mode screen.
2 Press the [ ] or [ ] key to select
"PAPER SIZE SET".
3
Press the [OK] key.
The paper size setting
screen will appear.
4 Press the [ ] or [ ] key to select the
paper tray for which the paper size is
being changed.
Example: Tray 2
5 Press the [ ] key.
The cursor moves to the
paper size selection
position on the right.
6 Press the [ ] or [ ] key to select the
paper size.
Example: Selecting 8-1/2" x
14" size
To change the size of another paper tray, press the
[
] key and then repeat steps 4 to 6.
7
Press the [OK] key.
A message asking you to
confirm the new paper size
setting will appear.
8 Press the [OK] key.
The selected paper size will be
stored and the display will
return to the base screen.
: Shows tray "1".
: Shows tray "2".
For the paper trays and tray numbers, see
"PAPER" on page 18.
DUPLEX
SPECIAL FUNCTION
ACC.
DUPLEX SCAN
DUPLEX SCAN
SPECIAL FUNCTION
SPECIAL MODES
ORIG. SIZE ENTER
PAPER SIZE SET
DISPLAY CONTRAST
GH
PQR
DUPLEX
SPECIAL FUNCTION
DUPLEX SCAN
SPECIAL FUNCTION
SPECIAL MODES
ORIG. SIZE ENTER
PAPER SIZE SET
DISPLAY CONTRAST
GHI
OK BACK
PAPER SIZE SET
8 x11R 11x17
11x17 8 x14
8 x13
8 x11
1
2
1
2
1
2
1
2
Note
PAPER SIZE SET
8 x11 11x17
11x17 8 x14
8 x13
8 x11
1
2
1
2
1
2
1
2
Affix the paper size label for the paper size
selected in step 6 to the label position on the
right end of the tray.
PAPER SIZE SET
8 x11
11x17
11x17 8 x14
8 x13
8 x11 1
2
1
2
1
2
1
2
PAPER SIZE SET
8 x11 11x17
11x17
8 x14
8 x13
8 x11
1
2
1
2
1
2
1
2
OK
OK
Note