Sharp AR-M162 - Manual (Page 34)

32
TROUBLESHOOTING AND MAINTENANCE
Misfeed in B
1 Open the front cover.
Push gently on both ends of the
front cover.
2 Turn the roller rotating knob in the
direction of the arrow.
3 Lower the right and left fusing unit
release levers and remove the misfed
paper.
Be careful not to tear the misfed
paper during removal.
4 Lift the fusing unit release levers.
5 Close the front cover and the side
cover.
The message " Clear paper
path." will be cleared and
copying will be possible.
The fusing unit is hot. Do not touch
the fusing unit when removing
misfed paper. Doing so may cause a
burn or injury.
• Do not touch the photoconductive drum
(green portion) when removing the misfed
paper. Doing so may damage the drum
and cause smudges on copies.
• Take care not to allow unfixed toner on
the misfed paper to soil your hands or
clothes.
Roller
rotating knob
Fusing unit release levers
Warning
Caution
• When closing the front cover, gently hold
both ends.
• When closing the side cover, hold the
handle.
• If the message does not clear, check
again to make sure that no pieces of
paper remain.
Note