Sharp AR-M162 - Manual (Page 75)

73
6
APPENDIX
SPECIFICATIONS
Name Digital Multifunctional System
AR-M162 AR-M207
Type Desktop
Photoconductive type OPC drum
Document glass type Fixed
Copy system Laser electrostatic method
Originals Sheets, bound documents, max. original size 11" x 17" (A3)
Copy sizes Max. 11" x 17" (A3), min. 5-1/2" x 8-1/2" (A5)
(5-1/2" x 8-1/2" (A5) can only be fed from tray 1 and the bypass tray)
Image loss: Max. 5/32" (4 mm) at top edge and bottom edge, combined maximum of approximately
11/64" (6 mm)
Copying speed 9 copies/min.
10 copies/min.
11 copies/min.
12 copies/min.
14 copies/min.
16 copies/min. 11" x 17" (A3)
8-1/2" x 14" (B4)
8-1/2" x 13"
8-1/2" x 11"R (A4R)
B5R
8-1/2" x 11", 5-1/2" x
8-1/2" (A4, B5, A5) 10 copies/min.
11 copies/min.
12 copies/min.
14 copies/min.
15 copies/min.
16 copies/min.
20 copies/min. 11" x 17"
A3
8-1/2" x 14", 8-1/2" x 13" (B4)
A4R
8-1/2" x 11"R
B5R
8-1/2" x 11", 5-1/2" x
8-1/2" (A4, B5, A5)
Continuous copying 1-999 copies (decrement type) (can be changed to 1- 99 in the key operator programs)
First-copy time* 1 , * 2 Approx. 7.2 s
Warm-up time* 2 Approx. 45 sec.
Copy ratios Variable: 25% to 400%, in 1% increments (total 376 steps) (50% to 200% when the SPF is used)
Fixed preset: 25%, 50%, 64%, 77%, 95%, 100%, 121%, 129%, 141%, 200%, 400%
(25%, 50%, 70%, 81%, 86%, 100%, 115%, 122%, 141%, 200%, 400%)
(25% and 400% only when the SPF is used)
Paper feeding One automatic feeding paper tray (250
sheets) + bypass tray (100 sheets) Two automatic feeding paper trays (250
sheets each) + bypass tray (100 sheets)
Fusing system Heat rollers
Developer system Dry development
Resolution Scanning: 600 x 300 dpi, output: 600 x 600 dpi (AUTO/TEXT mode)
Scanning: 600 x 600 dpi, output: 600 x 600 dpi (PHOTO mode)
Gradation Scanning: 256 halftones, printing: 2 halftones
Power supply AC 120V, 60 Hz, 10A
Power consumption Max. 1.2 kW
*1 Measured when copying is started after warm-up following power on, using the document glass. (Exposure set to "AUTO".
"RESOLUTION IN AUTO/TEXT MODE" set to 300 dpi and "WAITING COPY LAMP SETTING" set to "ON" in the key operator
programs. Paper fed from tray 1 on machine, 8-1/2" x 11" (A4) original and paper oriented horizontally, no reduction or
enlargement.)
*2 May vary depending on machine operating conditions and ambient conditions such as power voltage and humidity.