Sharp AR-M162 User Manual

Page 55

Advertising
background image

53

COPY FUNCTIONS

4

3

Select a preset ratio with the [

] or

[

] key, or set the ratio (zoom) with

the [

] or [

] key.

[

] key: Select a larger preset ratio

[

] key: Select a smaller preset ratio

[

] key: Decrease the ratio in increments of 1%

[

] key: Increase the ratio in increments of 1%

• Preset reduction ratios are: 95%, 77%, 64%, 50%

and 25% (86%, 81%, 70%, 50% and 25%). 25% can
only be selected when the original is placed on the
document glass.

• Preset enlargement ratios are: 121%, 129%, 141%,

200% and 400% (115%, 122%, 141%, 200% and
400%). 400% can only be selected when the original
is placed on the document glass.

• Zoom ratios: Any ratio from 25% to 400% (50% to

200% when the original is placed in the document
feeder tray) can be set in increments of 1%. You can
use the [

] or [

] key to set the approximate ratio

and then press the [

] key to decrease the ratio or

the [

] key to increase the ratio.

• To decrease or increase the zoom ratio rapidly, hold

down the [

] or [

] key. However the value will

stop at the preset reduction or enlargement ratios.
To move beyond these ratios, release the key and
then hold it down again. (Note that if the key auto
repeat function has been disabled in the key
operator programs, the ratio will not change when
the key is held down. (See "DISABLE AUTO KEY
REPEAT" in the "Key operator's guide".))

• To cancel a ratio setting, return the ratio to 100%

with the [

] or [

] key.

• The [ZOOM] key can be pressed to return the ratio to

100%.

4

Press the [OK] key.

You will return to the base
screen.

5

Make sure that the desired paper tray
is selected.

If the auto paper select function has been
enabled, the appropriate copy paper size will
have been automatically selected based on the
original size and the selected copy ratio. If the
auto paper select function has been canceled or
if you are copying onto a different size paper, use
the [PAPER] key to select the paper tray with the
desired paper size.

6

Set the number of copies and press
the [START] key (

).

GH

PQR

DUPLEX

SPECIAL FUNCTION

DUPLEX SCAN

GHI

OK

BACK

WXYZ

Advertising
This manual is related to the following products: