Sharp AR-M162 - Manual (Page 39)

37
2
CLEANING THE MACHINE
CLEANING THE DOCUMENT GLASS AND
SPF/DOCUMENT COVER
If the document glass, SPF, underside of the document cover, or the scanner for originals coming from SPF (A) (the
long narrow glass surface on the right side of the document glass) become dirty, the dirt may appear on copies.
Always keep these parts clean.
Wipe with a clean, soft cloth. If necessary, moisten the cloth with water or a small amount of neutral detergent. When
finished, wipe dry with a clean cloth.
Do not use thinner, benzene, or similar volatile cleaning agents.
Cleaning the original scanning glass (only when a SPF is installed)
If white or black lines appear in copies made with using the SPF, use the provided
glass cleaner to clean the original scanning glass. (If white or black lines appear in
copies, printed pages, or printed fax pages when the SPF is not used, see
"CLEANING THE TRANSFER CHARGER" on page 38.
1 Open the SPF and take out the glass
cleaner. 2 Clean the original scanning glass with
the glass cleaner.
3
Return the glass cleaner to its original
position.
CLEANING THE BYPASS TRAY PAPER FEED
ROLLER
If misfeeds occur frequently when feeding postcards, envelopes, or heavy paper through the
bypass tray, wipe the surface of the paper feed roller with a soft, clean cloth dampened with
alcohol or water.
Do not spray flammable cleaner gas. Gas from the spray may come in contact with the internal
electrical components or hot parts of the fusing unit, creating a risk of fire or electrical shock.
(A)
Warning
Example of dirty print image
Black lines White lines
Paper feed roller