Sharp AR-M162 - Manual (Page 261)

17
HOW TO USE THE NETWORK SCANNER FUNCTION
2
(13) [FORMAT] key ( page 28 )
When you send an image to one or more
recipients using Scan to E-mail or Scan to FTP,
the [FORMAT] key enables you to temporarily
override the individual file format settings (file
type / compression mode) stored for each
recipient and send the image to all of the
recipients using a single file format setting.
(14) [ORIGINAL SIZE] key ( page 26 )
This is used to set the size of the original to be
transmitted.
(15) [DUPLEX SCAN] key ( page 25 )
Press this key to use the duplex scan function.
(when the RSPF is installed)
(16) [SPECIAL FUNCTION] key
This key is used to select a special transmission
function, configure function settings, and access
the key operator programs.
(17) Arrow keys ( )
These are used to select items and move through
pages.
(18) [START] key ( )
This is used at the following times:
(1) When starting transmission
(2) When scanning an original
(3) When configuring and storing settings
ABC DEF
JKL GHI MNO
TUV PQRS WXYZ
@.-_
COPY EXPOSURE PAPER ZOOM AUTO % OUTPUT DUPLEX
SPECIAL FUNCTION
ACC. #-C READ-END
SCAN
FAX
COLOR MODE
PROGRAM
RESOLUTION
RESOLUTION ADDRESS FORMAT ORIGINAL SIZE DUPLEX SCAN
DUPLEX SCAN ORIGINAL SIZE ADDRESS BROADCAST
OK BACK
FAX STATUS
(2) (3) (4) (5) (6) (7)
(10) (11) (12) (13) (14) (15) (16) (17) (18)
• When the auto power shut-off function
activates, all lights except the mode key
indicators go off. For information on auto
power shut-off, see the "Operation
manual (for general information and
copier)".
• For information on the keys and indicators
which are used for the copy function and
other functions, see "OPERATION
PANEL" in the manual for each function.
Note