Sharp AR-M162 - Manual (Page 369)

43
3
CHECKING THE IP ADDRESS
There are several settings where the IP address must be entered or checked.
To check the IP address of the machine, hold down the status button on the network expansion kit for at least 2
seconds to print out a Printer Setting List.
HARDWARE AND SOFTWARE
REQUIREMENTS
Before installing the software from the CD-ROM that is provided standard with the machine or the CD-ROM that is
provided with the optional network expansion kit (AR-NB3), make sure that your computer satisfies the following
requirements.
*1 Printing is not available in MS-DOS mode.
*2 If you are installing the Printer Administration Utility in Windows 95, a system file must be updated before the utility can be
installed. For more information, click the "Display Readme" button in the Software Selection window of the installer.
*3 USB is not supported.
*4 Administrator's rights are required to install the software.
*5 The MFP driver, Button Manager, and other software on the "Software CD-ROM (1)" that is provided standard with the
machine are not supported.
*6 The machine's USB 2.0 port will transfer data at the speed specified by the USB 2.0 (Hi-Speed) standard only if the Microsoft
USB 2.0 driver is preinstalled in the computer, or if the USB 2.0 driver for Windows 2000 Professional/XP that Microsoft
provides through "Windows Update" is installed.
*7 Compatible with models preinstalled with Windows 98, Windows Me, Windows 2000 Professional, Windows XP Professional
or Windows XP Home Edition, Windows Server 2003, and which are equipped standard with a USB interface.
HOW TO RESET THE NETWORK EXPANSION KIT
To reset the network expansion kit, power on the machine while holding down the status button on the network
expansion kit.
After the network expansion kit is reset, network scanner destination information and scan settings will remain,
however, the network settings and network printer settings will revert to the factory default settings.
Windows (standard
machine system)
Windows (options) Macintosh (options)
Operating system* 1 Windows 95* 2,3 , Windows 98, Windows Me,
Windows NT Workstation 4.0 (Service Pack 5 or later)* 3,4 ,
Windows 2000 Professional* 4 , Windows XP Professional* 4 ,
Windows XP Home Edition* 4 , Windows 2000 Server* 5,
Windows Server 2003* 5
Mac OS 8.6 to 9.2.2,
10.1.5, 10.2 to 10.2.8
(excluding 10.2.2),
10.3 to 10.3.4
Computer type IBM PC/AT compatible computer
An environment on
which any of the
operating systems
listed above can fully
operate
Equipped standard with a
USB 2.0*
6 /1.1* 7 port or a
bi-directional parallel port
(IEEE1284 compliant).
Equipped with a
10Base-T/100Base-TX LAN
board
Display 800 x 600 dots (SVGA), 256 colors (or higher)
Hard disk free space 150 MB or more
Other hardware
requirements
An environment that allows any of the above operating systems to fully operate
Status button
Caution