Sharp AR-M162 - Manual (Page 349)

23
SETUP IN A WINDOWS ENVIRONMENT
2
17 Configure the settings and then click
the [Update] button.
Be sure to ask your network administrator for the
correct IP address, subnet mask, and default
gateway to be entered.
18 Your changes to the settings appear.
Make sure that the changes are
correct and then click the [OK] button.
19 Restart the machine.
Power off the machine and then power it back on.
20 Select [Search] from the [File] menu.
The IP address that you entered will appear.
Make sure that it is correct.
This completes the procedure for setting the IP
address.