Sharp AR-M162 - Manual (Page 221)

92
8
KEY OPERATOR PROGRAMS
The key operator programs are used by the key operator (administrator of the machine) to customize certain
features of the machine to better meet the needs of users.
This section explains key operator programs for the fax features of the machine. For key operator programs that are
for the copy function, print function, and network scanner function, see the respective manuals for those functions.
For key operator programs for general use of the machine, see the "Key operator's guide" in the "Operation manual
(for general information and copier)".
To use the key operator programs, the key operator code must be entered.
KEY OPERATOR PROGRAM LIST
KEY OPERATOR PROGRAMS FOR THE FAX FUNCTION
For the initial key operator code set at the factory, see "KEY OPERATOR CODE NUMBER: FACTORY SETTING"
in the "Operation manual (for general information and copier)."
The key operator programs that can be used depend on what peripheral devices have been installed. Note
Program name Page
LIST PRINT/SET
LIST PRINT 95
LIST SETTING 95
INITIAL SETTING
PAUSE TIME 96
OWN PASSCODE SET 96
SPEAKER VOLUME 97
TX/RX END SOUND 97
TX/RX END SOUND LENGTH 97
EXTENSION TEL 97
DISTINCTIVE RING 98
REMOTE RECEPTION 98
ACCOUNT CONTROL 98
ACCOUNT # SET 98
DATE & TIME SET 99
AUTO SUMMER TIME SETTING 99
DISABLE FAX PRINT HOLD 100
SENDING FUNCTION
RES. CON. SET 100
AUTO REDUCE TX 100
ROTATE TX 100
PAGE COUNTER SET 101
SEND MODE 101
QUICK ON LINE TX 101
PRINT STATION # IN RCVD DATA 101
ACC. NAME PRINT 101
RECALL SETTING (BUSY) 102
RECALL SET (ERR) 102
RING TIMEOUT IN AUTO TX 103
AUTO COVER SHEET 103
RCV. FUNCTION
FAX RECEPTION LIGHT 103
#OF RINGS AT. RX 104
TRAY SELECTION 104
RECEIVED DATA PRINT CONDITION 104
AUTO RCV REDUCE TO REGULAR SIZE 104
DUPLEX RECEPTION 105
8 1/2x11 RX REDUCE 105
FW. RX DATA 105
RECEIVED DATA FW. STATION SET 105
INDEX PRINT 106
EARLIER OUTPUT 106
ANTI JUNK FAX 106
ENTER JUNK FAX # 106
POLLING SECURITY
POLLING SECURITY 107
POLLING PASSCODE # MODE 107
Program name Page