Sharp AR-M162 - Manual (Page 60)

58
COPY FUNCTIONS
Copying from the document glass
1 Place the original for the front side of
the copy on the document glass, and
close the SPF.
2
Press the [DUPLEX] key.
The duplex mode selection
screen appears.
3 Select "1 to 2" with the [ ] or [ ] key,
or with the [DUPLEX] key.
4 If you wish to have the orientation of
the image on the back of the copy
paper be opposite the orientation of
the image on the front, set "BINDING
CHANGE" to "ON" with the [
] or [ ]
key.
5 Press the [OK] key.
You will return to the base
screen.
6 Make sure that the desired paper tray
is selected.
7 Set the number of copies and press
the [START] key (
).
8 Remove the first original and then
place the original for the back side of
the copy on the document glass.
Close the SPF and press the [START]
key (
).
• The copy will be delivered to the center tray.
• To cancel two-sided copying, press the [C] key.
• To cancel two-sided (duplex) copy mode, press the
[DUPLEX] key to select "1 to 1" and then press the
[OK] key.
• When making two-sided copies of an odd number of
originals, touch the [READ-END] key ( ) after
scanning the last original.
O % OUTPUT DUPLEX
SPECIAL FUNCTI
MAT ORIGINAL SIZE DUPLEX SCAN
DUPLEX SCAN ORIGINAL SIZE CAST
COPY MODE
1 to 1
1 to 2
2 to 2
GH
PQR
DUPLEX
SPECIAL FUNCTION
DUPLEX SCAN
COPY MODE
1 to 1
1 to 2
2 to 2
BINDING CHANGE
OFF
COPY MODE
1 to 1
1 to 2
2 to 2
BINDING CHANGE
ON
GHI
OK BACK
WXYZ
WXYZ
@.-_
READ-END