Sharp AR-M162 - Manual (Page 67)

65
CONVENIENT COPY FUNCTIONS
5
1 Place the originals in the document
feeder tray or the first original on the
document glass.
If the originals are placed in the
document feeder tray, sort
mode will be automatically
selected. This can be changed
to no sort in the key operator
programs. (See the "Key
operator's guide".)
If the first original is placed on the document glass, no
sort mode will be automatically selected.
2 Press the [OUTPUT] key.
The output mode
selection screen will
appear.
3 Select "NO SORT" or "SORT" with the
[
] or [ ] key, or with the [OUTPUT]
key.
4 Press the [OK] key.
You will return to the base
screen.
5 Select other copy settings as needed
and press the [START] key (
).
If you placed the originals in the
document feeder tray in step 1,
copying will start. If you
selected "SORT" in step 3 and
placed the first original on the
document glass, follow steps 6
and 7. Note that if you selected
"NO SORT" in step 3, copying
will begin.
6 When the START indicator lights,
replace the original with the next
original and press the [START] key
(
).
Repeat step 6 until all originals
have been scanned.
7
When all originals have been
scanned, press the [READ-END] key
(
).
• Copying will start.
• If the memory becomes full while the originals are
being scanned, "Memory is full." will appear in the
display. To start copying the originals that have been
scanned to that point, press the [START] key (
).
To cancel the copy job, press the [CA] key.
• The optional memory board (AR-SM5) can be
installed to increase the number of originals that can
be scanned. The memory can be expanded up to a
maximum of 272 MB (the amount expanded is 256
MB).
Offset function
This function offsets each set of copies from the
previous set in center tray, making it easy to separate
sets of copies. The offset function can be disabled in
the key operator programs. (See the "Key operator's
guide".)
OM AUTO % OUTPUT DUPLEX
SPEC
RESS FORMAT ORIGINAL SIZE DUPLEX SCAN
DUPLEX SCAN ORIGINAL SIZE RESS BROADCAST
SORT
NO SORT
SORT
GH
PQR
DUPLEX
SPECIAL FUNCTION
DUPLEX SCAN
GHI
OK BACK
WXYZ
@.-_
READ-END
@.-_
. #-C READ-END
Offset function enabled Offset function disabled