Sharp AR-M162 - Manual (Page 262)

18
HOW TO USE THE NETWORK SCANNER FUNCTION
SCAN MODE (BASE SCREEN)
The base screen of scan mode is displayed by pressing the [SCAN] key from the base screen of copy mode, print
mode, or fax mode.
Base screen of scan mode
(1) Message display
Messages appear here to indicate the current
status of the machine.
(2) Destination display
This shows the selected destination.
There are four scanner transmission modes:
Scan to E-mail, Scan to FTP, Scan to FTP
(Hyperlink), and Scan to Desktop.
This shows the currently selected destination and
transmission mode.
(3) Color mode display
This shows the currently selected color mode for
scanning.
(4) File type display
This shows the image data file type to be created.
(5) Original display ( page 26 )
This displays an icon to indicate the original
scanning mode when an original has been
placed.
: One-sided scanning in the SPF.
: Document glass
: Two-sided scanning in the RSPF.
The size of the original is also displayed.
(6) Transmission mode display
When
appears to the right of the icon, the [ ]
key can be pressed to show a list of the currently
selected destinations.
A destination can also be deleted in this screen.
(7) Resolution display
The shows the scanning resolution.
(8) File creation display
This shows the currently selected file creation
method.
If a screen appears asking you what type of connection you are using after you press the [SCAN] key, select
"NETWORK" with the [
] or [ ] key and press the [OK] key.
Note
Ready to scan.
XXXXX
COLOR 150dpi
PDF MULTI
8 x11
1
2
( 2 )
( 3 )
( 4 )
( 5 )
( 1 )
( 7 )
( 8 )
( 6 )