Sharp AR-M162 - Manual (Page 107)

14
PRINTER SHARING
Settings in Windows NT 4.0
If your operating system is Windows NT 4.0, configure settings as follows in the printer properties after installing the
printer driver. For the procedure for installing the printer driver, see "1. INSTALLING THE SOFTWARE (THAT
ACCOMPANIES THE MACHINE)" in the "Software setup guide".
1 Click the [Start] button, select
[Settings] and then click [Printers].
2
Click the [SHARP AR-XXXX] printer
driver icon and select [Properties]
from the [File] menu.
The printer properties will appear.
3
Click the [Ports] tab and then click the
[Add Port] button.
The [Printer Ports] dialog box will appear.
4 Select [Local Port] in the "Available
Printer Ports" list, and click the [New
Port] button.
The "Port Name" dialog box will appear.
5 Enter "\\(name of server connected to
machine)\(name of shared printer)",
and click the [OK] button.
6
Click the [Close] button in the [Printer
Ports] dialog box.
7 Click the [OK] button in the printer
properties window.
name of server connected to machine
name of shared printer